This is an old revision of the document!
Table of Contents
ISCSI
Linux (Target)
Target just means that this machine will house the physical hard drives and will share them as ISCSI drives.
http://www.howtoforge.com/using-iscsi-on-debian-squeeze-initiator-and-target
HP System Management Homepage needed to run ACU CLI in the web browser.
For HP Homepage, add –nopre option to the rpm install command.
adding hp array config to linux:
for openfiler: conary update rpm rpm -ivh --nodeps <package-name> for debian: apt-get install alien alien -k <package-name> dpkg -i <package-name>
HP ACU CLI Commands:
controller slot=9 logicaldrive all show detail controller all show config detail ctrl slot=9 modify nbwc=disable controller slot=9 show detail controller slot=9 logicaldrive 1 modify caching=enable
Openfiler works pretty well. (for disks that are smaller than 2TB)
Windows (Initiator)
Initiator just means that this box will connect to the targets and create disk that can be shared over the network.
http://technet.microsoft.com/en-us/library/ee338477%28v=ws.10%29.aspx