Differences

This shows you the differences between two versions of the page.

--- wiki:projects:contracts:mocap:blog [2010/08/03 23:27] – jeff
+++ wiki:projects:contracts:mocap:blog [2020/11/19 14:21] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== MoCap Dev Blog ======
+===== October 1, 2010 =====
+[[http://www.custompcb.com/]]
+===== September 9, 2010 =====
+Ok, created the first pass on the 6-DOF sensor module.  I need to do a validation check to make sure the schematic for the gyros and the 3.3v are correct.  Once I do that, I should be able to start creating the circuit.
+===== September 8, 2010 =====
+Pretty good EE tool.
+[[http://www.diptrace.com/download.php]]
 ===== June 24, 2010 =====
+Someone's mocap system that is close to what I'm building.
 [[http://www.xsens.com/en/general/mvn]]
@@ Line 11: / Line 27: @@
 ===== May 14, 2010 =====
-I built a board and on tri axis sensor and I'm a little stumped as to why 3ds max is torturing the data.  It's creating "noise" where there is none.  So I started looking into the power supply.  I found:
+I built a board and one tri axis sensor and I'm a little stumped as to why 3ds max is torturing the data.  It's creating "noise" where there is none.  So I started looking into the power supply.  I found:
   * 280ma propstick

wiki/projects/contracts/mocap/blog.1280878054.txt.gz · Last modified: 2020/11/19 14:21 (external edit)

Back to top