Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
wiki:projects:cnc [2021/02/03 01:26] – [3d prints] jeffwiki:projects:cnc [2021/12/18 15:11] (current) – [Tools] jeff
Line 1: Line 1:
 ====== CNC Machine ====== ====== CNC Machine ======
 +
 +  * [[https://howtomechatronics.com/projects/laser-engraving-with-diy-arduino-scara-robot-complete-guide/|2d trace and cut]]
 +    * trace capabilities
  
   * [[http://lcamtuf.coredump.cx/gcnc/full/|Guide to CNC]]   * [[http://lcamtuf.coredump.cx/gcnc/full/|Guide to CNC]]
Line 5: Line 8:
     * linuxcnc axis-remote --mdi     * linuxcnc axis-remote --mdi
     * linuxcnc "axis-remote" home axis     * linuxcnc "axis-remote" home axis
 +  * [[https://github.com/trasz/grblControl|grblControl]]
  
   * Note: [[http://www.opencascade.org/]]   * Note: [[http://www.opencascade.org/]]
 +
 +===== Tools =====
 +
 +  * touch probe (conductive)
 +  * 6mm single flute
 +  * 12mm 2 flute
 +  * carbide 8" 3 flute variable
 +  * 3mm single flute
 +  * 2mm external radius
 +  * 2mm single flute
 +  * 8" 2 flute chamfer
 +  * Parallel Set
 +  * Precision 1-2-3 Blocks
 +  * Dial Indicator
 +  * 4mm collet
 +  * Digital Calipers
 +  * Deburr Set
 +    * Rapid bur handle
 +    * 18 mm extension blade 
 +    * 165 mm cranked countersink blade 
 +    * S100 blade 
 +    * S150 blade
 +    * S20 blade 
 +    * D50 scraper blade
 +  * Detail Prototyping Bit Bundle
 +    * 1/8" 2-flute ball end mill
 +    * 1/32" 2-flute flat end mill
 +    * 1/64" 2-flute flat end mill
 +    * 1/100" 2-flute flat end mill 
 +    * 80º metal engraving bit
 +    * 1/8" ER-11 collet
 +  * Harvey Performance Company Bit Bundle
 +    * Helical 1/4" 3-flute 35º helix square end mill
 +    * Helical 1/4" 3-flute 40º helix ball end mill
 +    * Helical 1/8" 3-flute 35º helix square end mill
 +    * Harvey Tool 1/8" 4-flute 45° chamfer cutter
 +    * Helical 1/4" 3-flute corner radius, reduced neck
 +    * Harvey Tool 1/8" 60º pyramid-pointed engraver
 +  * 6061 Aluminum 3" x1"x .25"
 +  * 6061 Aluminum 3"x 1"x .50"
 +  * 6061 Aluminum 3"x 1"x .75"
 +  * 360 Brass 4"x 4"x .25"
 +  * Delrin white 3"x 6" x 1"
 +  * Delrin white 3"x6"x .5"
 +  * Delrin white 6"x6"x .5"
 +  * Delrin white 6"x6"x1"
 +  * Delrin Cube  3"x3"x 3"
  
 ===== Hand Controller ===== ===== Hand Controller =====
Line 27: Line 78:
   * [[http://hobbycam.org/]] seems to be dead   * [[http://hobbycam.org/]] seems to be dead
   * RAMPS works   * RAMPS works
 +
 +==== PCB Milling ====
 +
 +  * FlatCam
 +  * AutoLevellerAE
  
 ===== 3d prints ===== ===== 3d prints =====
wiki/projects/cnc.1612315598.txt.gz · Last modified: 2021/02/03 01:26 by jeff
Back to top
CC Attribution-Share Alike 4.0 International
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0