House Projects
Snow load of 35
-
6×6 needs a 18in round concrete pillar they are 20in but there is an overlap of 1in on both sides.
6×6 are 8ft on center
4 inches up into the foundation board for concrete
2×6 horizontal slats are 32in vertical spacing
headers are 2 2×6 stacked or just one 2×6
trusses are 2 ply i.e. 2×6 and 2×6 stuck together for a 4×6
trusses are 8 ft on center
truss purlins are stood on end for bridging the span
the dimension of the building matches the outside stringers
concrete is 4in into the base board
upper floor
2×6 framing
32“ on center
zip r3 outside
zip tape osb
if heating dominate climate, vapor barrier on the inside
if cooling dominate climate, vapor barrier on the outside and breathable
Sounds like it needs to be on both sides. saw one person doing it.
-
Phases
Phase 0
Phase 0.1
Phase 1
build the main house
This consists of the garage and the living space
dimensions are 71ft by 51ft
2 door garage, 1 door, 1 door, 1 door, 1 door
16 foot tall first floor
10 foot tall second floor
Door opening at least 130in wide
water well
septic tank
electricity
vaulted ceiling in the living space
zone hvac
Phase 2
Phase 3
another garage extended on to the end of the first
dimensions are 71ft by 51ft
1 door, 1 door, 1 door, 1 door, 2 door garage
16 foot tall first floor
roof is a deck
DeWALT DPT-16D131FH 3 1/2-Inch x .131-Inch 2,000ct Paper Tape Smooth Round Head
Kobalt Large Mens Synthetic Leather High Performance Gloves
Design
Air Quality control
blue
climate controlled - 70F deg +/-2 deg
humidity controlled - 40% +/- 5%
allergen controlled - merv 13/MPR 1900 - below 1 ACH 50 - positive air pressure
Green
Solar
Back to top