Snow load of 35
-
6×6 needs a 18in round concrete pillar they are 20in but there is an overlap of 1in on both sides.
6×6 are 8ft on center
4 inches up into the foundation board for concrete
2×6 horizontal slats are 32in vertical spacing
headers are 2 2×6 stacked or just one 2×6
trusses are 2 ply i.e. 2×6 and 2×6 stuck together for a 4×6
trusses are 8 ft on center
truss purlins are stood on end for bridging the span
the dimension of the building matches the outside stringers
concrete is 4in into the base board
upper floor
2×6 framing
32“ on center
zip r3 outside
zip tape osb
if heating dominate climate, vapor barrier on the inside
if cooling dominate climate, vapor barrier on the outside and breathable
Sounds like it needs to be on both sides. saw one person doing it.
-